Dervish
Sarna News
- HEXTECH Review - Wave 3 Brings More Urban Options To Your Battlefield
- Your BattleTech News Round-Up For March, 2024
- Crashing 'Mechs With Jennifer Brozek, Author Of The Rogue Academy Trilogy
- Getting The Word Out With Rem Alternis, Catalyst Community & Marketing Director
- Bad 'Mechs - Yeoman
- Read more →
Dervish | |
---|---|
Production information | |
Manufacturer | Achernar BattleMechs[1]
|
Production Year | 2520[2][3][4][5] |
Model | DV-6M[1] |
Class | Medium |
Cost | 4,989,967 C-bills |
Technical specifications | |
'Mech type | Inner Sphere BattleMech |
Mass | 55 tons |
Chassis | Dorwinion Standard 55T |
Armor | Maximillian 105 |
Engine | Core Tek 275 |
Communications System | Achernar Electronics HID-21 |
Targeting Tracking System | Federated Hunter Mk. II |
Heat Sinks | 10 single |
Speed | 86 km/h |
Jump Jets | Swingline X-100 |
Armament |
|
BV (1.0) | 868 |
BV (2.0) | 1,146[1][2] |
Contents
Description[edit]
At the higher end of the medium class, the Dervish is a highly mobile fire support BattleMech. Commissioned in 2520 by the Lyran Commonwealth,[6] the Dervish has a maximum speed of 86.4 km/h, letting it keep up with and support most Succession Wars-era medium and light models. Five jump jets also gives the 'Mech a jumping capability of 150 meters, allowing it to move through rough terrain with ease; these were originally an afterthought in the design but have proven their worth. While regarded by some as a poor man's Archer, the Dervish's speed and weaponry nevertheless allow it to provide quick fire support and free larger 'Mechs for other duties.
The design's major flaws lie in its lack of hand actuators and in its armoring. Having no hands limits its usefulness outside of combat and restricts its capability when confronted in close quarters. As for the armor, while sufficient to handle small and medium weapons, it is inadequate against heavier firepower. Commanders cannot overcome the first issue but they can affect the second, albeit at an apparent cost of firepower. The conundrum faced here is that the tradeoff becomes counterintuitive given the 'Mech's primary role in the field.[2][3][7]
The Dervish was among the first 'Mechs mass produced by the Great Houses and has served as a workhorse for their armies since its introduction. It was eventually commissioned into the Star League Defense Force during the Reunification War, with the Terran Hegemony providing funds to allow their original model Dervishes be upgraded to the DV-6M standard in 2610. Its service in the SLDF ensured the widespread proliferation of the design; even ComStar Explorer Corps missions into the Deep Periphery have found examples of original-model Dervishes among the forces of Nueva Castile. Over the course of the Succession Wars however the 'Mech's numbers decreased due to loss or lack of parts, and all but one of Achernar's factories was destroyed. Though it could still be found throughout the Inner Sphere by the end of the Third Succession War, only the Federated Suns maintained production of the venerable design.[2][3][7][8][9][10][11]
The 'Mech remained one of the Suns' most common medium-weight machines, being particularly popular with the Avalon Hussars, and was earmarked for use by several newly forming Federated Commonwealth regiments after the Fourth Succession War. However, interest in the design began to wane in later years, and while the 7D refit of 3047 with its use of lostech generated higher sales, Achernar was forced to heavily lobby House Davion to keep buying them. Ironically the run-up to the FedCom Civil War and the conflict itself was enough to increase demand and prevent the company from retooling its Dervish lines. In the wake of the civil war the Federated Suns continued purchasing upgraded Dervishes while the Lyran Alliance adopted the Griffin. Older models can be found in militia and reserve units in other armies, while small mercenary outfits have found the 'Mech to be durable and easy to maintain.[2][10]
During the Jihad a number of manufacturers began manufacturing "retrotech" 'Mechs using details of the original production standard of primitive 'Mech designs; one of the designs that was reintroduced to service as a part of this retrotech manufacturing production was the original Dervish, with companies such as Sword of the Prophet Enterprises of Algedi[12] producing primitive Dervishes; production at some sites continued beyond 3079.[13]
Weapons and Equipment[edit]
The Dervish carries as its main weapons two Federated 10-Shot LRM-10 launchers. These missile launchers give the Dervish the long-range capability needed to provide fire support to friendly units and are safely embedded in the torso as opposed to the exposed launchers on other 'Mechs. One ton of ammunition per launcher provides sufficient endurance for any but the most prolonged battles. For close combat, the Dervish carries two Federated 2-Shot SRM-2 launchers and two ChisComp 39 medium lasers. The SRM launchers are completely self-contained within the forearms, allowing them to be aimed quickly, and fed by one ton of ammunition each, while the lasers are placed just above the launchers and ensure the 'Mech is still capable of fighting should it run out of missiles. The Dervish is capable of jumping 150 meters and is protected by seven and a half tons of armor.[3][7][2][14]
Variants[edit]
- DV-1S
- The original version of the Dervish that was produced in 2520 was not up to the same standards as contemporary Terran Hegemony designs. The use of comparatively "primitive" parts resulted in a heavier cockpit, engine, and less efficient armor. Consequently, the 1S had a top speed of 64 km/h and could only jump 90 meters. While the missile launchers were the same as the 6M, it did not have that version's lasers. 1S variants continued to exist in militias, but were raided for parts during the Succession Wars. It was not intended for front line use, but for militia units.[15] Though there were few, if any, remaining by the end of the 2990s, they once again began to be produced on low-tech worlds during the Jihad due to that conflict's disruption of supply lines.[13][12] BV (2.0) = 858[6][16]
- DV-6Md
- This Star League era variant uses an XL engine, 12 single heat sinks, and upgrades the LRM-10s to LRM-15s. Three tons of ammunition are in a CASE protected torso bin. BV (2.0) = 1,251[17]
- DV-6Mr
- A field expedient refit, this Jihad-era upgrade introduced in 3073 takes a standard DV-6M and replaces the SRM-2 launchers with medium pulse lasers. The single heat sinks are traded for double-strength models.[18] BV (2.0) = 1,347[19][20]
- DV-7D
- The 7D Dervish is a 3047 upgrade of the design using Star League technology. The 'Mech is built with an endo steel chassis and also uses eight tons of ferro-fibrous armor with CASE for protection against ammunition explosions. With the saved weight, the SRM-2s have been upgraded to Federated SuperStreak Streak SRM-2s and the 'Mech uses double heat sinks. This variant was first produced by Achernar BattleMechs on New Avalon.[8][9][21][22] BV (1.0) = 1,328;[23] BV (2.0) = 1,412[24]
- DV-8D
- The 8D Dervish utilizes some of the newest technologies available at the time of the variant's introduction in 3062. The 'Mech is built with an endo steel chassis and is powered by an extralight engine, and also carries two more tons of armor than the 6M model. The weapons carried by the 8D are two LRM-15 launchers with an Artemis IV fire control system, while the SRM-2 launchers and medium lasers were removed for four ER medium lasers.[21][25] BV (1.0) = 1,415;[23][26] BV (2.0) = 1,765[27]
- DV-9D
- This upgrade of the -8D introduced in 3068 removes the missile launchers and replaces them with four MML-5s with five tons of ammunition to provide flexibility in the usage of munitions. The saved tonnage was used to add an additional double heat sink, though the heat management system can be quickly overtaxed at short range. 11.5 tons of armor improves the 'Mech's durability and a targeting computer was added to aid the accuracy of the lasers.[21] BV (2.0) = 1,518[28][29]
- DV-11DK
- A Draconis Combine-built variant built after the fall of New Avalon, it combines the best of Clan-like Combine missile launchers and Federated Suns laser technology. Building from the original model, this model features 5 jump jets, a 275-rated XL engine and a Compact Gyro on an Endo-Steel chassis protected by Ballistic-Reinforced Armor. Similar to the original mass-production model, the 11DK features 2 clan-specced LRM 10 in the torsos with 2 tons of ammo, while each arm is equipped with an Actuator Enhancement System, a clan-specced Streak SRM 2 and a Medium Re-engineered Laser, providing good short range punch. BV (1.0) = ???? BV (2.0) = 1,919 [30]
Custom Variants[edit]
- DV-8D2 "Lightbringer"
- The Lightbringer is a heavily customized 'Mech designed for close combat in the Solaris arenas. A deadly close-in fighter, the Lightbringer has recently been seen fighting in grudge matches across the Free Worlds League. After removing the standard armament and jump jets from a DV-8D, Nikos Matapoulous installed eight improved jump jets in the legs and torso, and each arm is now equipped with a pair of ER medium lasers and a snub-nose PPC. A helmet of spikes, arranged in a crown, protects the 'Mech's head from melee attacks, and a pair of coolant pods helps shed the massive heat load from the Lightbringer's arsenal. BV (2.0) = 1,658.[31]
- DV-6M "Mauck"
- The customized 'Mech of fierce Azami warrior Ukla Mauck, Mauck stripped the missile launchers from his 'Mech and replaced them with a trio of MRM-10s. The further addition of Triple Strength Myomer makes Mauck's nearly 200-year-old Dervish a terror in close-range combat.[21][32]
Apocryphal Variants[edit]
From MechWarrior Online:
- DV-7P
- A PGI-invented variant, the 7P carries an MRM-20 and MRM-10 in each arm, supported by a medium laser in each arm and side torso. Such a heavy loadout while retaining the Dervish's usual seven and half tons of armor and five jump jets is made possible with an 275-rated extralight engine and endo steel frame. The 7P is fitted with 10 double heat sinks and carries a combined four tons of MRM reloads.[33]
- DV-FR Frenzy
- MechWarrior Online's Dervish Hero 'Mech, the Frenzy, is built around an 275-rated extralight engine and an endo steel frame, carrying an SRM-4 in each arm in support of LRM-20 in each side torso. Clad in seven and half tons of standard armor and fitted with five jump jets and ten double heat sinks, the Frenzy carries two tons each of LRM and SRM missile reloads.[33]
Design Quirks[edit]
The Dervish is subject to the following Design Quirks:[34]
The DV-1S Dervish variant is subject to the following Design Quirks:[15]
Related Designs[edit]
Hellspawn - The Hellspawn was created by General Motors to replace the design for the Davion half of Federated Commonwealth.
Notes[edit]
- In German products, the unit's proper name was translated to Derwisch. The model code was changed accordingly to DW-6M.
- In French products, the unit's proper name was translated as Derviche.
Gallery[edit]
Original DV-6M Dervish from TRO:3025
DV-6M Dervish from TRO:3025 Revised
DV-7D Dervish from TRO:3050
DV-7D Dervish from TRO:3050 Upgrade
Experimental DV-8D2 Dervish Lightbringer from XTRO:Pirates
Dervish from RG:iClan vol. 29
Dervish in colors of Syrtis Fusiliers from Camo Specs
DV-6M Dervish of Robinson Rangers from CBT Universe
A Dervish receives a fatal hit to the cockpit from CBT Intro Rulebook
Primitive DV-1S Dervish from Jihad Secrets
Primitive DV-1S Dervish from XTRO: Primitives, Vol. 3
DV-6M Dervish in motion from CCG
Model of Dervish from MWO
Dervish standee from BattleTech, Fourth Edition
Dervish miniature from BattleTech Alpha Strike: Fire Lance Pack
References[edit]
- ↑ 1.0 1.1 1.2 Technical Readout: Succession Wars, pp. 94–95: DV-6M Dervish
- ↑ 2.0 2.1 2.2 2.3 2.4 2.5 Technical Readout: 3039, pp. 140–141
- ↑ 3.0 3.1 3.2 3.3 Technical Readout: 3025, p. 62
- ↑ Jihad Secrets: the Blake Documents, p. 151
- ↑ Era Digest: Age of War, p. 11
- ↑ 6.0 6.1 Jihad Secrets: The Blake Documents, p. 151: "DV-1S 'Primitive' Dervish"
- ↑ 7.0 7.1 7.2 Technical Readout: 3025 Revised, p. 64
- ↑ 8.0 8.1 Technical Readout: 3050, p. 126
- ↑ 9.0 9.1 Technical Readout: 3050 Revised, pp. 116–117
- ↑ 10.0 10.1 Technical Readout: 3050 Upgrade, p. 62
- ↑ -6M MUL listing
- ↑ 12.0 12.1 Objectives: Draconis Combine, p. 34: "Sword of the Prophet Enterprises"
- ↑ 13.0 13.1 Objectives: Draconis Combine, p. 4: "State of the Industry at a Glance (Dec 3079)"
- ↑ Introductory Record Sheets, p. 15
- ↑ 15.0 15.1 Experimental Technical Readout: Primitives, Volume 3, p. 5
- ↑ -1S MUL listing
- ↑ Era Report: 2750, p. 129
- ↑ Technical Readout: 3085, p. 190
- ↑ Record Sheets: 3085 Unabridged — Old is the New New, p. 83
- ↑ -6Mr MUL listing
- ↑ 21.0 21.1 21.2 21.3 Technical Readout: 3050 Upgrade, pp. 62–63
- ↑ Record Sheets: 3050 Upgrade (Inner Sphere), p. 114
- ↑ 23.0 23.1 Combat Operations, p. 127
- ↑ -7D MUL listing
- ↑ Record Sheets: 3050 Upgrade (Inner Sphere), p. 115
- ↑ Record Sheets: Upgrades, p. 95
- ↑ -8D MUL listing
- ↑ Record Sheets: 3050 Upgrades (Inner Sphere), p. 116
- ↑ -9D MUL listing
- ↑ Recognition Guide: ilClan, vol. 29, p.13
- ↑ Experimental Technical Readout: Pirates, p. 6
- ↑ Kit deSummersville, Freelance BattleTech Writer, 16 July 2013
- ↑ 33.0 33.1 MechWarrior Online Dervish Sale Page
- ↑ BattleMech Manual, p. 91: Design Quirk Table - Dervish Entry
Bibliography[edit]
- BattleMech Manual
- Classic BattleTech Introductory Record Sheets
- Era Report: 2750
- Experimental Technical Readout: Pirates
- Experimental Technical Readout: Primitives, Volume 3
- Jihad Secrets: The Blake Documents
- Master Unit List: Battle Values
- MechWarrior Online Dervish Sale Page
- Objectives: Draconis Combine
- Recognition Guide: ilClan, vol. 29
- Record Sheets: 3025/3026
- Record Sheets: 3050
- Record Sheets: 3050 Upgrade (Inner Sphere)
- Record Sheets: 3050 Upgrades Unabridged (Inner Sphere)
- Record Sheets: 3085 Unabridged — Old is the New New
- Record Sheets: Upgrades
- Starterbook: Sword and Dragon
- Starterbook: Wolf and Blake
- Technical Readout: 3025
- Technical Readout: 3025 Revised
- Technical Readout: 3039
- Technical Readout: 3050
- Technical Readout: 3050 Revised
- Technical Readout: 3050 Upgrade
- Technical Readout: 3085